Fastener automated testing equipment assembly debugging basic skills?

1, to understand the characteristics of the inspected product (including appearance, size, tolerance, structure, process, etc.).

2, from parts to start assembly debugging.

3, the installation of the cylinder should ensure that the front and rear stops, and there can be no abnormal resistance.

4, rotating part to ensure balance, verticality, concentricity, indexing accuracy.

5、Positioning pins should be tightly fitted on one side to facilitate disassembling and assembling to ensure the precision in the second assembly.

6、Feeding material channel according to the product, the tolerance band is about 0.1mm. Ensure that the product in the material channel unimpeded.

7、Screw, slide rail Pay attention to the nut and slide rail, to avoid ball drop out. Ensure the parallelism, perpendicularity and concentricity of the parts when assembled in the fastener automated testing equipment.

8, the speed of the valve should be in the premise of not affecting the productivity of just the speed of the product to be transported away as a good shape.

9, the position of the magnetic switch and light brazing before and after the limit of the middle position shall prevail.